Nowadays, most homeowners easily misinterpret the importance of a sound and wholesome-looking garage door, which can lead to the downfall of their exterior in the long run. One such importance to painting a garage door is protecting it from rust involvement, especially in damp regions. Not only this side effect will damage the integrity of your door but also increase the maintenance cost in the near future.

All in all, if you already have a worn-out metal garage door, then the best possible solution is no doubt painting it. But how will you go about that?

There are many complications down the road, which is why today, we will provide you with proper guidance in this regard. So, at the end of the day, you will easily be able to paint metal garage doors. Now, let’s head over to the process!

Things to Consider Before You Paint a Garage Door

Before you pick that brush and head straight down to paint a garage door, there are several things you need to take into account.

  • First and foremost is the weather and overall exterior conditions. You need to make sure the factor in aspects like temperature, rainfall, and humidity before making any decision. Besides weather forecasts, sunlight also plays a vital role in this situation.
  • So, for those who opt to paint metal garage doors during hot summer days in which the sun is bearing down straight, it might not always be optimal. That’s why it is best to choose the timing wisely. Additionally, you want to consider the type of paint which will be best suited for your case.
  • If you have a metal door, we will advise you to go for Specialist Paint as it is resilient to discoloration even in the harshest condition.
  • In contrast to wood doors, you might want to do a bit of further research. Additionally, it will be wise to invest in a durable primer.

How to Paint a Garage Door the Easiest way?

STEP 1: Start By Washing Over The Door Surface Thoroughly 

  • To start this process, you first need to clean the surface of the garage door. This initial step has quite a significance as painting over ‘dirt gathered exterior’ is not optimal. For the cleaning itself, you want to use a garden hose along with a regular house wash and scrub away all the debris and residue that has been hardened over the years.
  • Also, if you have a metal door with added texture, you want to scrub it thoroughly and apply any mild detergent over it.
  • Once you are done, dry the whole surface with the help of regular towels and prepare for prepping.

STEP 2: Prep The Surface And Remove Any Kind Of Formed Rust

  • Before you do that, make sure to unplug the garage opener and release the chain so the door can move freely. After the door position has been adjusted, it’s time to handle those rust spots. This could be done with the help of a little bit of scrubbing by using either sandpaper or wire brush. For a higher scrubbing surface, it’s best to equip a ladder.
  • It’s worth noting that garage sides and bottom converge rust spots quite easily, so pay additional attention to those regions. Also, if your garage door requires patching in advance, then make sure to invest a little time in that.

STEP 3: Apply The Paint Over The Body Of The Door & Through The Panels

  • Once the preparations have been complete, it’s time to paint the metal garage door. So, incorporate both the paint and primer in a single finish and start the process. It is advisable to proceed from the top panel by brushing side to side and then make your way to the rear end.
  • Also, after your front panel is done, try to lift the adjustable door and then move to the next section. This will give the door surface ample time to dry up and lower the risk of any drips.

STEP 4: Incorporate The Second Coat Over The Surface, If Necessary 

  • Additional coating mostly depends on your door type and the category of colors you are going for. If the painted colors are a bit dark or contain a light texture, then yes, it’s vital to coat the door over the second time. But if you’re going for unique color options from a quality brand, then it is ideal for keeping the setup as it is.
  • Furthermore, if you tend to do additional paint over the side panels, then make sure to wait a couple of hours to allow the first layer to dry.

STEP 5: Inspect The Sections After You Paint A Garage Door

  • After the additional layers start to dry up, you want to close the door and make a quick inspection. If you see any paint drips, especially between the side panels, try to stabilize them using a utility knife.
  • Now, wait for almost a day and allow them to cure up. You can always utilize sandpaper to regulate the finishing further.

Bottom Line

This concludes our brief guide on painting a garage door, in the best possible way. If you are still confused and unsure about this process, then it is always a great idea to hire a professional. They will make this whole process a lot easier for you and help you out by giving the exterior a premium look. On the other hand, if you’re one of those do-it-your own homeowners, then it’s wise to spend a bit of time selecting the right paint. Other than that, if you are looking for a bit of versatility then the most affordable option is to convert your garage space into a Private Gym or Fitness Club.